Module:Graph
From Thetacola Wiki
Jump to navigationJump to search
| File:Full-protection-shackle.svg | This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing. |
| Related pages |
|---|
Module with helper functions for the Graph extension to display graphs and maps. From de:Modul:Graph.
Functions for templates
map
Creates a JSON object for <graph> to display a political map with colored highlights. In the article namespace the template {{Graph:Map}} should be used instead. See its page for use cases.
Maps can be found at Special:Prefixindex/Template:Graph:Map/Inner/ (for example Worldmap2c-json with country borders) and new maps should also be saved under Module:Graph/.
Parameters:
- basemap: sets the base map. The map definitions must follow the TopoJSON format and if saved in Wikipedia are available for this module. Maps in the default directory Special:Prefixindex/Template:Graph:Map/Inner/ like Worldmap2c-json should only be referenced by their name while omitting the Module:Graph/ prefix to allow better portability. The parameter also accepts URLs, e.g. maps from other Wikipedia versions (the link should follow the scheme of
//en.wikipedia.org/w/index.php?title=mapname&action=raw, i.e. protocol-relative without leading http/s and a trailing action=raw to fetch the raw content only). URLs to maps on external sites should be avoided for the sake of link stability, performance, security, and she be assumed to be blocked by the software or browser anyway. - scale: the scaling factor of the map (default: 100)
- projection: the map projection to use. Supported values are listed at https://github.com/d3/d3-geo-projection. The default value is
equirectangularfor an equirectangular projection. - center: map center (corresponds in the map data to both comma-separated values of the
scalefield) - feature: which geographic objects should be displayed (corresponds in the map data to the name of the field under the
objectsfield). The default is valuecountries. - ids of geographic entities: The actual parameter names depend on the base map and the selected feature. For example, for the above mentioned world map the ids are ISO country codes. The values can be either colors or numbers in case the geographic entities should be associated with numeric data:
DE=lightbluemarks Germany in light blue color, andDE=80.6assigns Germany the value 80.6 (population in millions). In the latter case, the actual color depends on the following parameters. - colorScale: the color palette to use for the color scale. The palette must be provided as a comma-separated list of color values. The color values must be given either as
#rgb/#rrggbbor by a CSS color name. Instead of a list, the built-in color palettescategory10andcategory20can also be used. - scaleType: supported values are
linearfor a linear mapping between the data values and the color scale,logfor a log mapping,powfor a power mapping (the exponent can be provided aspow 0.5),sqrtfor a square-root mapping, andquantizefor a quantized scale, i.e. the data is grouped in as many classes as the color palette has colors. - domainMin: lower boundary of the data values, i.e. smaller data values are mapped to the lower boundary
- domainMax: upper boundary of the data values, i.e. larger data values are mapped to the upper boundary
- legend: show color legend (does not work with
quantize) - defaultValue: default value for unused geographic entities. In case the id values are colors the default value is
silver, in case of numbers it is 0. - formatjson: format JSON object for better legibility
chart
Creates a JSON object for <graph> to display charts. In the article namespace the template Template:Graph:Chart should be used instead. See its page for use cases.
Parameters:
- width: width of the chart
- height: height of the chart
- type: type of the chart:
linefor line charts,areafor area charts, andrectfor (column) bar charts, andpiefor pie charts. Multiple series can stacked using thestackedprefix, e.g.stackedarea. - interpolate: interpolation method for line and area charts. It is recommended to use
monotonefor a monotone cubic interpolation – further supported values are listed at https://github.com/nyurik/vega/wiki/Marks#line. - colors: color palette of the chart as a comma-separated list of colors. The color values must be given either as
#rgb/#rrggbb/#aarrggbbor by a CSS color name. For#aarrggbbtheaacomponent denotes the alpha channel, i.e. FF=100% opacity, 80=50% opacity/transparency, etc. (The default color palette if n <= 10 is Category10: Lua error in package.lua at line 80: module 'Module:TNT' not found. else is Category20: Lua error in package.lua at line 80: module 'Module:TNT' not found.). See Template:ChartColors for details. - xAxisTitle and yAxisTitle: captions of the x and y axes
- xAxisMin, xAxisMax, yAxisMin, and yAxisMax: minimum and maximum values of the x and y axes (not yet supported for bar charts). These parameters can be used to invert the scale of a numeric axis by setting the lowest value to the Max and highest value to the Min.
- xAxisFormat and yAxisFormat: changes the formatting of the axis labels. Supported values are listed at https://github.com/d3/d3-3.x-api-reference/blob/master/Formatting.md#numbers for numbers. For example, the format
%can be used to output percentages. For date/time specification of supported values is https://github.com/d3/d3-3.x-api-reference/blob/master/Time-Formatting.md , e.g.xAxisFormat=%d-%m-%Yfor result 13-01-1977. - xAxisAngle: rotates the x axis labels by the specified angle. Recommended values are: -45, +45, -90, +90
- xType and yType: data types of the values, e.g.
integerfor integers,numberfor real numbers,datefor dates (e.g. YYYY-MM-DD), andstringfor ordinal values (usestringto prevent axis values from being repeated when there are only a few values). Remarks:Datetype doesn't work for bar graphs. Fordatedata input please use ISO date format (e.g. YYYY-MM-DD) acc. to date and time formats used in HTML. Other date formats may work but not in all browsers. Date is unfortunately displayed only in en-US format for all Wikipedia languages. Workaround is to use xAxisFormat and yAxisFormat with numerical dates format. - xScaleType and yScaleType: scale types of the x and y axes, e.g.
linearfor linear scale (default),logfor logarithmic scale andsqrtfor square root scale.- A logarithmic chart allows only positive values to be plotted. A square root scale chart cannot show negative values.
- x: the x-values as a comma-separated list, for dates and time see remark in xType and yType
- y or y1, y2, …: the y-values for one or several data series, respectively. For pie charts
y2denotes the radius of the corresponding sectors. For dates and time see remark in xType and yType - legend: show legend (only works in case of multiple data series)
- y1Title, y2Title, …: defines the label of the respective data series in the legend
- linewidth: line width for line charts or distance between the pie segments for pie charts. Setting to 0 with
type=linecreates a scatter plot. - linewidths: different line widths may be defined for each series of data with csv, if set to 0 with "showSymbols" results with points graph, eg.:
linewidths=1, 0, 5, 0.2 - showSymbols: show symbol on data point for line graphs, if a number is provided, the symbol size (default 2.5) may be defined for each data series, eg.:
showSymbols=1, 2, 3, 4 - symbolsShape: custom shape for symbol: circle, x, square, cross, diamond, triangle_up, triangle_down, triangle_right, triangle_left. May be defined for each series of data with csv, eg.:
symbolsShape= circle, cross, square - symbolsNoFill: if true symbol will be without fill (only stroke),
- symbolsStroke: if "x" symbol is used or option "symbolsNoFill" symbol stroke width, default 2.5
- showValues: Additionally, output the y values as text. (Currently, only (non-stacked) bar and pie charts are supported.) The output can be configured used the following parameters provided as
name1:value1, name2:value2(e.g.|showValues=fontcolor:blue,angle:0).- format: Format the output according to https://github.com/d3/d3-3.x-api-reference/blob/master/Formatting.md#numbers for numbers and https://github.com/d3/d3-3.x-api-reference/blob/master/Time-Formatting.md for date/time.
- fontcolor: text color
- fontsize: text size
- offset: move text by the given offset. For bar charts and pie charts with
midanglethis also defines if the text is inside or outside the chart. - angle (pie charts only): text angle in degrees or
midangle(default) for dynamic angles based on the mid-angle of the pie sector.
- innerRadius: For pie charts: defines the inner radius to create a doughnut chart.
- xGrid and yGrid: display grid lines on the x and y axes.
- Annotations
- vAnnotationsLine and hAnnotationsLine: display vertical or horizontal annotation lines on specific values e.g.
hAnnotationsLine=4, 5, 6 - vAnnotationsLabel and hAnnotationsLabel: display vertical or horizontal annotation labels for lines e.g.
hAnnotationLabel = label1, label2, label3
- vAnnotationsLine and hAnnotationsLine: display vertical or horizontal annotation lines on specific values e.g.
- formatjson: format JSON object for better legibility
Template wrappers
The functions mapWrapper and chartWrapper are wrappers to pass all parameters of the calling template to the respective map and chart functions.
Note: In the editor preview the graph extension creates a canvas element with vector graphics. However, when saving the page a PNG raster graphics is generated instead. {{#invoke:Graph|function_wrapper_name}}
-- ATTENTION: Please edit this code at https://de.wikipedia.org/wiki/Modul:Graph
-- This way all wiki languages can stay in sync. Thank you!
--
-- BUGS: X-Axis label format bug? (xAxisFormat =) https://en.wikipedia.org/wiki/Template_talk:Graph:Chart#X-Axis_label_format_bug?_(xAxisFormat_=)
-- linewidths - doesnt work for two values (eg 0, 1) but work if added third value of both are zeros? Same for marksStroke - probably bug in Graph extension
-- clamp - "clamp" used to avoid marks outside marks area, "clip" should be use instead but not working in Graph extension, see https://phabricator.wikimedia.org/T251709
-- TODO:
-- marks:
-- - line strokeDash + serialization,
-- - symStroke serialization
-- - symbolsNoFill serialization
-- - arbitrary SVG path symbol shape as symbolsShape argument
-- - annotations
-- - vertical / horizontal line at specific values [DONE] 2020-09-01
-- - rectangle shape for x,y data range
-- - graph type serialization (deep rebuild reqired)
-- - second axis (deep rebuild required - assignment of series to one of two axies)
-- Version History (_PLEASE UPDATE when modifying anything_):
-- 2020-09-01 Vertical and horizontal line annotations
-- 2020-08-08 New logic for "nice" for x axis (problem with scale when xType = "date") and grid
-- 2020-06-21 Serializes symbol size
-- transparent symbosls (from line colour) - buggy (incorrect opacity on overlap with line)
-- Linewidth serialized with "linewidths"
-- Variable symbol size and shape of symbols on line charts, default showSymbols = 2, default symbolsShape = circle, symbolsStroke = 0
-- p.chartDebuger(frame) for easy debug and JSON output
-- 2020-06-07 Allow lowercase variables for use with [[Template:Wikidata list]]
-- 2020-05-27 Map: allow specification which feature to display and changing the map center
-- 2020-04-08 Change default showValues.fontcolor from black to persistentGrey
-- 2020-04-06 Logarithmic scale outputs wrong axis labels when "nice"=true
-- 2020-03-11 Allow user-defined scale types, e.g. logarithmic scale
-- 2019-11-08 Apply color-inversion-friendliness to legend title, labels, and xGrid
-- 2019-01-24 Allow comma-separated lists to contain values with commas
-- 2018-10-13 Fix browser color-inversion issues via #54595d per [[mw:Template:Graph:PageViews]]
-- 2018-09-16 Allow disabling the legend for templates
-- 2018-09-10 Allow grid lines
-- 2018-08-26 Use user-defined order for stacked charts
-- 2018-02-11 Force usage of explicitely provided x minimum and/or maximum values, rotation of x labels
-- 2017-08-08 Added showSymbols param to show symbols on line charts
-- 2016-05-16 Added encodeTitleForPath() to help all path-based APIs graphs like pageviews
-- 2016-03-20 Allow omitted data for charts, labels for line charts with string (ordinal) scale at point location
-- 2016-01-28 For maps, always use wikiraw:// protocol. https:// will be disabled soon.
local p = {}
--add debug text to this string with eg. debuglog = debuglog .. "" .. "\n\n" .. "- " .. debug.traceback() .. "result type: ".. type(result) .. " result: \n\n" .. mw.dumpObject(result)
--invoke chartDebuger() to get graph JSON and this string
debuglog = "Debug " .. "\n\n"
local baseMapDirectory = "Module:Graph/"
local persistentGrey = "#54595d"
local shapes = {}
shapes = {
circle = "circle", x= "M-.5,-.5L.5,.5M.5,-.5L-.5,.5" , square = "square",
cross = "cross", diamond = "diamond", triangle_up = "triangle-up",
triangle_down = "triangle-down", triangle_right = "triangle-right",
triangle_left = "triangle-left",
banana = "m -0.5281,0.2880 0.0020,0.0192 m 0,0 c 0.1253,0.0543 0.2118,0.0679 0.3268,0.0252 0.1569,-0.0582 0.3663,-0.1636 0.4607,-0.3407 0.0824,-0.1547 0.1202,-0.2850 0.0838,-0.4794 l 0.0111,-0.1498 -0.0457,-0.0015 c -0.0024,0.3045 -0.1205,0.5674 -0.3357,0.7414 -0.1409,0.1139 -0.3227,0.1693 -0.5031,0.1856 m 0,0 c 0.1804,-0.0163 0.3622,-0.0717 0.5031,-0.1856 0.2152,-0.1739 0.3329,-0.4291 0.3357,-0.7414 l -0.0422,0.0079 c 0,0 -0.0099,0.1111 -0.0227,0.1644 -0.0537,0.1937 -0.1918,0.3355 -0.3349,0.4481 -0.1393,0.1089 -0.2717,0.2072 -0.4326,0.2806 l -0.0062,0.0260"
}
local function numericArray(csv)
if not csv then return end
local list = mw.text.split(csv, "%s*,%s*")
local result = {}
local isInteger = true
for i = 1, #list do
if list[i] == "" then
result[i] = nil
else
result[i] = tonumber(list[i])
if not result[i] then return end
if isInteger then
local int, frac = math.modf(result[i])
isInteger = frac == 0.0
end
end
end
return result, isInteger
end
local function stringArray(text)
if not text then return end
local list = mw.text.split(mw.ustring.gsub(tostring(text), "\\,", "<COMMA>"), ",", true)
for i = 1, #list do
list[i] = mw.ustring.gsub(mw.text.trim(list[i]), "<COMMA>", ",")
end
return list
end
local function isTable(t) return type(t) == "table" end
local function copy(x)
if type(x) == "table" then
local result = {}
for key, value in pairs(x) do result[key] = copy(value) end
return result
else
return x
end
end
function p.map(frame)
-- map path data for geographic objects
local basemap = frame.args.basemap or "Template:Graph:Map/Inner/Worldmap2c-json" -- WorldMap name and/or location may vary from wiki to wiki
-- scaling factor
local scale = tonumber(frame.args.scale) or 100
-- map projection, see https://github.com/mbostock/d3/wiki/Geo-Projections
local projection = frame.args.projection or "equirectangular"
-- defaultValue for geographic objects without data
local defaultValue = frame.args.defaultValue or frame.args.defaultvalue
local scaleType = frame.args.scaleType or frame.args.scaletype or "linear"
-- minimaler Wertebereich (nur für numerische Daten)
local domainMin = tonumber(frame.args.domainMin or frame.args.domainmin)
-- maximaler Wertebereich (nur für numerische Daten)
local domainMax = tonumber(frame.args.domainMax or frame.args.domainmax)
-- Farbwerte der Farbskala (nur für numerische Daten)
local colorScale = frame.args.colorScale or frame.args.colorscale or "category10"
-- show legend
local legend = frame.args.legend
-- the map feature to display
local feature = frame.args.feature or "countries"
-- map center
local center = numericArray(frame.args.center)
-- format JSON output
local formatJson = frame.args.formatjson
-- map data are key-value pairs: keys are non-lowercase strings (ideally ISO codes) which need to match the "id" values of the map path data
local values = {}
local isNumbers = nil
for name, value in pairs(frame.args) do
if mw.ustring.find(name, "^[^%l]+$") and value and value ~= "" then
if isNumbers == nil then isNumbers = tonumber(value) end
local data = { id = name, v = value }
if isNumbers then data.v = tonumber(data.v) end
table.insert(values, data)
end
end
if not defaultValue then
if isNumbers then defaultValue = 0 else defaultValue = "silver" end
end
-- create highlight scale
local scales
if isNumbers then
if colorScale then colorScale = string.lower(colorScale) end
if colorScale == "category10" or colorScale == "category20" then else colorScale = stringArray(colorScale) end
scales =
{
{
name = "color",
type = scaleType,
domain = { data = "highlights", field = "v" },
range = colorScale,
nice = true,
zero = false
}
}
if domainMin then scales[1].domainMin = domainMin end
if domainMax then scales[1].domainMax = domainMax end
local exponent = string.match(scaleType, "pow%s+(%d+%.?%d+)") -- check for exponent
if exponent then
scales[1].type = "pow"
scales[1].exponent = exponent
end
end
-- create legend
if legend then
legend =
{
{
fill = "color",
offset = 120,
properties =
{
title = { fontSize = { value = 14 } },
labels = { fontSize = { value = 12 } },
legend =
{
stroke = { value = "silver" },
strokeWidth = { value = 1.5 }
}
}
}
}
end
-- get map url
local basemapUrl
if (string.sub(basemap, 1, 10) == "wikiraw://") then
basemapUrl = basemap
else
-- if not a (supported) url look for a colon as namespace separator. If none prepend default map directory name.
if not string.find(basemap, ":") then basemap = baseMapDirectory .. basemap end
basemapUrl = "wikiraw:///" .. mw.uri.encode(mw.title.new(basemap).prefixedText, "PATH")
end
local output =
{
version = 2,
width = 1, -- generic value as output size depends solely on map size and scaling factor
height = 1, -- ditto
data =
{
{
-- data source for the highlights
name = "highlights",
values = values
},
{
-- data source for map paths data
name = feature,
url = basemapUrl,
format = { type = "topojson", feature = feature },
transform =
{
{
-- geographic transformation ("geopath") of map paths data
type = "geopath",
value = "data", -- data source
scale = scale,
translate = { 0, 0 },
center = center,
projection = projection
},
{
-- join ("zip") of mutiple data source: here map paths data and highlights
type = "lookup",
keys = { "id" }, -- key for map paths data
on = "highlights", -- name of highlight data source
onKey = "id", -- key for highlight data source
as = { "zipped" }, -- name of resulting table
default = { v = defaultValue } -- default value for geographic objects that could not be joined
}
}
}
},
marks =
{
-- output markings (map paths and highlights)
{
type = "path",
from = { data = feature },
properties =
{
enter = { path = { field = "layout_path" } },
update = { fill = { field = "zipped.v" } },
hover = { fill = { value = "darkgrey" } }
}
}
},
legends = legend
}
if (scales) then
output.scales = scales
output.marks[1].properties.update.fill.scale = "color"
end
local flags
if formatJson then flags = mw.text.JSON_PRETTY end
return mw.text.jsonEncode(output, flags)
end
local function deserializeXData(serializedX, xType, xMin, xMax)
local x
if not xType or xType == "integer" or xType == "number" then
local isInteger
x, isInteger = numericArray(serializedX)
if x then
xMin = tonumber(xMin)
xMax = tonumber(xMax)
if not xType then
if isInteger then xType = "integer" else xType = "number" end
end
else
if xType then error("Numbers expected for parameter 'x'") end
end
end
if not x then
x = stringArray(serializedX)
if not xType then xType = "string" end
end
return x, xType, xMin, xMax
end
local function deserializeYData(serializedYs, yType, yMin, yMax)
local y = {}
local areAllInteger = true
for yNum, value in pairs(serializedYs) do
local yValues
if not yType or yType == "integer" or yType == "number" then
local isInteger
yValues, isInteger = numericArray(value)
if yValues then
areAllInteger = areAllInteger and isInteger
else
if yType then
error("Numbers expected for parameter '" .. name .. "'")
else
return deserializeYData(serializedYs, "string", yMin, yMax)
end
end
end
if not yValues then yValues = stringArray(value) end
y[yNum] = yValues
end
if not yType then
if areAllInteger then yType = "integer" else yType = "number" end
end
if yType == "integer" or yType == "number" then
yMin = tonumber(yMin)
yMax = tonumber(yMax)
end
return y, yType, yMin, yMax
end
local function convertXYToManySeries(x, y, xType, yType, seriesTitles)
local data =
{
name = "chart",
format =
{
type = "json",
parse = { x = xType, y = yType }
},
values = {}
}
for i = 1, #y do
local yLen = table.maxn(y[i])
for j = 1, #x do
if j <= yLen and y[i][j] then table.insert(data.values, { series = seriesTitles[i], x = x[j], y = y[i][j] }) end
end
end
return data
end
local function convertXYToSingleSeries(x, y, xType, yType, yNames)
local data = { name = "chart", format = { type = "json", parse = { x = xType } }, values = {} }
for j = 1, #y do data.format.parse[yNames[j]] = yType end
for i = 1, #x do
local item = { x = x[i] }
for j = 1, #y do item[yNames[j]] = y[j][i] end
table.insert(data.values, item)
end
return data
end
local function getXScale(chartType, stacked, xMin, xMax, xType, xScaleType)
if chartType == "pie" then return end
local xscale =
{
name = "x",
range = "width",
zero = false, -- do not include zero value
domain = { data = "chart", field = "x" }
}
if xScaleType then xscale.type = xScaleType else xscale.type = "linear" end
if xMin then xscale.domainMin = xMin end
if xMax then xscale.domainMax = xMax end
if xMin or xMax then
xscale.clamp = true
xscale.nice = false
end
if chartType == "rect" then
xscale.type = "ordinal"
if not stacked then xscale.padding = 0.2 end -- pad each bar group
else
if xType == "date" then
xscale.type = "time"
elseif xType == "string" then
xscale.type = "ordinal"
xscale.points = true
end
end
if xType and xType ~= "date" and xScaleType ~= "log" then xscale.nice = true end -- force round numbers for x scale, but "log" and "date" scale outputs a wrong "nice" scale
return xscale
end
local function getYScale(chartType, stacked, yMin, yMax, yType, yScaleType)
if chartType == "pie" then return end
local yscale =
{
name = "y",
--type = yScaleType or "linear",
range = "height",
-- area charts have the lower boundary of their filling at y=0 (see marks.properties.enter.y2), therefore these need to start at zero
zero = chartType ~= "line",
nice = yScaleType ~= "log" -- force round numbers for y scale, but log scale outputs a wrong "nice" scale
}
if yScaleType then yscale.type = yScaleType else yscale.type = "linear" end
if yMin then yscale.domainMin = yMin end
if yMax then yscale.domainMax = yMax end
if yMin or yMax then yscale.clamp = true end
if yType == "date" then yscale.type = "time"
elseif yType == "string" then yscale.type = "ordinal" end
if stacked then
yscale.domain = { data = "stats", field = "sum_y" }
else
yscale.domain = { data = "chart", field = "y" }
end
return yscale
end
local function getColorScale(colors, chartType, xCount, yCount)
if not colors then
if (chartType == "pie" and xCount > 10) or yCount > 10 then colors = "category20" else colors = "category10" end
end
local colorScale =
{
name = "color",
type = "ordinal",
range = colors,
domain = { data = "chart", field = "series" }
}
if chartType == "pie" then colorScale.domain.field = "x" end
return colorScale
end
local function getAlphaColorScale(colors, y)
local alphaScale
-- if there is at least one color in the format "#aarrggbb", create a transparency (alpha) scale
if isTable(colors) then
local alphas = {}
local hasAlpha = false
for i = 1, #colors do
local a, rgb = string.match(colors[i], "#(%x%x)(%x%x%x%x%x%x)")
if a then
hasAlpha = true
alphas[i] = tostring(tonumber(a, 16) / 255.0)
colors[i] = "#" .. rgb
else
alphas[i] = "1"
end
end
for i = #colors + 1, #y do alphas[i] = "1" end
if hasAlpha then alphaScale = { name = "transparency", type = "ordinal", range = alphas } end
end
return alphaScale
end
local function getLineScale(linewidths, chartType)
local lineScale = {}
lineScale =
{
name = "line",
type = "ordinal",
range = linewidths,
domain = { data = "chart", field = "series" }
}
return lineScale
end
local function getSymSizeScale(symSize)
local SymSizeScale = {}
SymSizeScale =
{
name = "symSize",
type = "ordinal",
range = symSize,
domain = { data = "chart", field = "series" }
}
return SymSizeScale
end
local function getSymShapeScale(symShape)
local SymShapeScale = {}
SymShapeScale =
{
name = "symShape",
type = "ordinal",
range = symShape,
domain = { data = "chart", field = "series" }
}
return SymShapeScale
end
local function getValueScale(fieldName, min, max, type)
local valueScale =
{
name = fieldName,
type = type or "linear",
domain = { data = "chart", field = fieldName },
range = { min, max }
}
return valueScale
end
local function addInteractionToChartVisualisation(plotMarks, colorField, dataField)
-- initial setup
if not plotMarks.properties.enter then plotMarks.properties.enter = {} end
plotMarks.properties.enter[colorField] = { scale = "color", field = dataField }
-- action when cursor is over plot mark: highlight
if not plotMarks.properties.hover then plotMarks.properties.hover = {} end
plotMarks.properties.hover[colorField] = { value = "red" }
-- action when cursor leaves plot mark: reset to initial setup
if not plotMarks.properties.update then plotMarks.properties.update = {} end
plotMarks.properties.update[colorField] = { scale = "color", field = dataField }
end
local function getPieChartVisualisation(yCount, innerRadius, outerRadius, linewidth, radiusScale)
local chartvis =
{
type = "arc",
from = { data = "chart", transform = { { field = "y", type = "pie" } } },
properties =
{
enter = {
innerRadius = { value = innerRadius },
outerRadius = { },
startAngle = { field = "layout_start" },
endAngle = { field = "layout_end" },
stroke = { value = "white" },
strokeWidth = { value = linewidth or 1 }
}
}
}
if radiusScale then
chartvis.properties.enter.outerRadius.scale = radiusScale.name
chartvis.properties.enter.outerRadius.field = radiusScale.domain.field
else
chartvis.properties.enter.outerRadius.value = outerRadius
end
addInteractionToChartVisualisation(chartvis, "fill", "x")
return chartvis
end
local function getChartVisualisation(chartType, stacked, colorField, yCount, innerRadius, outerRadius, linewidth, alphaScale, radiusScale, lineScale, interpolate)
if chartType == "pie" then return getPieChartVisualisation(yCount, innerRadius, outerRadius, linewidth, radiusScale) end
local chartvis =
{
type = chartType,
properties =
{
-- chart creation event handler
enter =
{
x = { scale = "x", field = "x" },
y = { scale = "y", field = "y" }
}
}
}
addInteractionToChartVisualisation(chartvis, colorField, "series")
if colorField == "stroke" then
chartvis.properties.enter.strokeWidth = { value = linewidth or 2.5 }
if type(lineScale) =="table" then
chartvis.properties.enter.strokeWidth.value = nil
chartvis.properties.enter.strokeWidth =
{
scale = "line",
field= "series"
}
end
end
if interpolate then chartvis.properties.enter.interpolate = { value = interpolate } end
if alphaScale then chartvis.properties.update[colorField .. "Opacity"] = { scale = "transparency" } end
-- for bars and area charts set the lower bound of their areas
if chartType == "rect" or chartType == "area" then
if stacked then
-- for stacked charts this lower bound is the end of the last stacking element
chartvis.properties.enter.y2 = { scale = "y", field = "layout_end" }
else
--[[
for non-stacking charts the lower bound is y=0
TODO: "yscale.zero" is currently set to "true" for this case, but "false" for all other cases.
For the similar behavior "y2" should actually be set to where y axis crosses the x axis,
if there are only positive or negative values in the data ]]
chartvis.properties.enter.y2 = { scale = "y", value = 0 }
end
end
-- for bar charts ...
if chartType == "rect" then
-- set 1 pixel width between the bars
chartvis.properties.enter.width = { scale = "x", band = true, offset = -1 }
-- for multiple series the bar marking needs to use the "inner" series scale, whereas the "outer" x scale is used by the grouping
if not stacked and yCount > 1 then
chartvis.properties.enter.x.scale = "series"
chartvis.properties.enter.x.field = "series"
chartvis.properties.enter.width.scale = "series"
end
end
-- stacked charts have their own (stacked) y values
if stacked then chartvis.properties.enter.y.field = "layout_start" end
-- if there are multiple series group these together
if yCount == 1 then
chartvis.from = { data = "chart" }
else
-- if there are multiple series, connect colors to series
chartvis.properties.update[colorField].field = "series"
if alphaScale then chartvis.properties.update[colorField .. "Opacity"].field = "series" end
-- if there are multiple series, connect linewidths to series
if chartype == "line" then
chartvis.properties.update["strokeWidth"].field = "series"
end
-- apply a grouping (facetting) transformation
chartvis =
{
type = "group",
marks = { chartvis },
from =
{
data = "chart",
transform =
{
{
type = "facet",
groupby = { "series" }
}
}
}
}
-- for stacked charts apply a stacking transformation
if stacked then
table.insert(chartvis.from.transform, 1, { type = "stack", groupby = { "x" }, sortby = { "-_id" }, field = "y" } )
else
-- for bar charts the series are side-by-side grouped by x
if chartType == "rect" then
-- for bar charts with multiple series: each serie is grouped by the x value, therefore the series need their own scale within each x group
local groupScale =
{
name = "series",
type = "ordinal",
range = "width",
domain = { field = "series" }
}
chartvis.from.transform[1].groupby = "x"
chartvis.scales = { groupScale }
chartvis.properties = { enter = { x = { field = "key", scale = "x" }, width = { scale = "x", band = true } } }
end
end
end
return chartvis
end
local function getTextMarks(chartvis, chartType, outerRadius, scales, radiusScale, yType, showValues)
local properties
if chartType == "rect" then
properties =
{
x = { scale = chartvis.properties.enter.x.scale, field = chartvis.properties.enter.x.field },
y = { scale = chartvis.properties.enter.y.scale, field = chartvis.properties.enter.y.field, offset = -(tonumber(showValues.offset) or -4) },
--dx = { scale = chartvis.properties.enter.x.scale, band = true, mult = 0.5 }, -- for horizontal text
dy = { scale = chartvis.properties.enter.x.scale, band = true, mult = 0.5 }, -- for vertical text
align = { },
baseline = { value = "middle" },
fill = { },
angle = { value = -90 },
fontSize = { value = tonumber(showValues.fontsize) or 11 }
}
if properties.y.offset >= 0 then
properties.align.value = "right"
properties.fill.value = showValues.fontcolor or "white"
else
properties.align.value = "left"
properties.fill.value = showValues.fontcolor or persistentGrey
end
elseif chartType == "pie" then
properties =
{
x = { group = "width", mult = 0.5 },
y = { group = "height", mult = 0.5 },
radius = { offset = tonumber(showValues.offset) or -4 },
theta = { field = "layout_mid" },
fill = { value = showValues.fontcolor or persistentGrey },
baseline = { },
angle = { },
fontSize = { value = tonumber(showValues.fontsize) or math.ceil(outerRadius / 10) }
}
if (showValues.angle or "midangle") == "midangle" then
properties.align = { value = "center" }
properties.angle = { field = "layout_mid", mult = 180.0 / math.pi }
if properties.radius.offset >= 0 then
properties.baseline.value = "bottom"
else
if not showValues.fontcolor then properties.fill.value = "white" end
properties.baseline.value = "top"
end
elseif tonumber(showValues.angle) then
-- qunatize scale for aligning text left on right half-circle and right on left half-circle
local alignScale = { name = "align", type = "quantize", domainMin = 0.0, domainMax = math.pi * 2, range = { "left", "right" } }
table.insert(scales, alignScale)
properties.align = { scale = alignScale.name, field = "layout_mid" }
properties.angle = { value = tonumber(showValues.angle) }
properties.baseline.value = "middle"
if not tonumber(showValues.offset) then properties.radius.offset = 4 end
end
if radiusScale then
properties.radius.scale = radiusScale.name
properties.radius.field = radiusScale.domain.field
else
properties.radius.value = outerRadius
end
end
if properties then
if showValues.format then
local template = "datum.y"
if yType == "integer" or yType == "number" then template = template .. "|number:'" .. showValues.format .. "'"
elseif yType == "date" then template = template .. "|time:" .. showValues.format .. "'"
end
properties.text = { template = "{{" .. template .. "}}" }
else
properties.text = { field = "y" }
end
local textmarks =
{
type = "text",
properties =
{
enter = properties
}
}
if chartvis.from then textmarks.from = copy(chartvis.from) end
return textmarks
end
end
local function getSymbolMarks(chartvis, symSize, symShape, symStroke, noFill, alphaScale)
local symbolmarks
symbolmarks =
{
type = "symbol",
properties =
{
enter =
{
x = { scale = "x", field = "x" },
y = { scale = "y", field = "y" },
strokeWidth = { value = symStroke },
stroke = { scale = "color", field = "series" },
fill = { scale = "color", field = "series" },
}
}
}
if type(symShape) == "string" then
symbolmarks.properties.enter.shape = { value = symShape }
end
if type(symShape) == "table" then
symbolmarks.properties.enter.shape = { scale = "symShape", field = "series" }
end
if type(symSize) == "number" then
symbolmarks.properties.enter.size = { value = symSize }
end
if type(symSize) == "table" then
symbolmarks.properties.enter.size = { scale = "symSize", field = "series" }
end
if noFill then
symbolmarks.properties.enter.fill = nil
end
if alphaScale then
symbolmarks.properties.enter.fillOpacity =
{ scale = "transparency", field = "series" }
symbolmarks.properties.enter.strokeOpacity =
{ scale = "transparency", field = "series" }
end
if chartvis.from then symbolmarks.from = copy(chartvis.from) end
return symbolmarks
end
local function getAnnoMarks(chartvis, stroke, fill, opacity)
local vannolines, hannolines, vannoLabels, vannoLabels
vannolines =
{
type = "rule",
from = { data = "v_anno" },
properties =
{
update =
{
x = { scale = "x", field = "x" },
y = { value = 0 },
y2 = { field = { group = "height" } },
strokeWidth = { value = stroke },
stroke = { value = persistentGrey },
opacity = { value = opacity }
}
}
}
vannolabels =
{
type = "text",
from = { data = "v_anno" },
properties =
{
update =
{
x = { scale = "x", field = "x", offset = 3 },
y = { field = { group = "height" }, offset = -3 },
text = { field = "label" },
baseline = { value = "top" },
angle = { value = -90 },
fill = { value = persistentGrey },
opacity = { value = opacity }
}
}
}
hannolines =
{
type = "rule",
from = { data = "h_anno" },
properties =
{
update =
{
y = { scale = "y", field = "y" },
x = { value = 0 },
x2 = { field = { group = "width" } },
strokeWidth = { value = stroke },
stroke = { value = persistentGrey },
opacity = { value = opacity }
}
}
}
hannolabels =
{
type = "text",
from = { data = "h_anno" },
properties =
{
update =
{
y = { scale = "y", field = "y", offset = 3 },
x = { value = 0 , offset = 3 },
text = { field = "label" },
baseline = { value = "top" },
angle = { value = 0 },
fill = { value = persistentGrey },
opacity = { value = opacity }
}
}
}
return vannolines, vannolabels, hannolines, hannolabels
end
local function getAxes(xTitle, xAxisFormat, xAxisAngle, xType, xGrid, yTitle, yAxisFormat, yType, yGrid, chartType)
local xAxis, yAxis
if chartType ~= "pie" then
if xType == "integer" and not xAxisFormat then xAxisFormat = "d" end
xAxis =
{
type = "x",
scale = "x",
title = xTitle,
format = xAxisFormat,
grid = xGrid
}
if xAxisAngle then
local xAxisAlign
if xAxisAngle < 0 then xAxisAlign = "right" else xAxisAlign = "left" end
xAxis.properties =
{
title =
{
fill = { value = persistentGrey }
},
labels =
{
angle = { value = xAxisAngle },
align = { value = xAxisAlign },
fill = { value = persistentGrey }
},
ticks =
{
stroke = { value = persistentGrey }
},
axis =
{
stroke = { value = persistentGrey },
strokeWidth = { value = 2 }
},
grid =
{
stroke = { value = persistentGrey }
}
}
else
xAxis.properties =
{
title =
{
fill = { value = persistentGrey }
},
labels =
{
fill = { value = persistentGrey }
},
ticks =
{
stroke = { value = persistentGrey }
},
axis =
{
stroke = { value = persistentGrey },
strokeWidth = { value = 2 }
},
grid =
{
stroke = { value = persistentGrey }
}
}
end
if yType == "integer" and not yAxisFormat then yAxisFormat = "d" end
yAxis =
{
type = "y",
scale = "y",
title = yTitle,
format = yAxisFormat,
grid = yGrid
}
yAxis.properties =
{
title =
{
fill = { value = persistentGrey }
},
labels =
{
fill = { value = persistentGrey }
},
ticks =
{
stroke = { value = persistentGrey }
},
axis =
{
stroke = { value = persistentGrey },
strokeWidth = { value = 2 }
},
grid =
{
stroke = { value = persistentGrey }
}
}
end
return xAxis, yAxis
end
local function getLegend(legendTitle, chartType, outerRadius)
local legend =
{
fill = "color",
stroke = "color",
title = legendTitle,
}
legend.properties = {
title = {
fill = { value = persistentGrey },
},
labels = {
fill = { value = persistentGrey },
},
}
if chartType == "pie" then
legend.properties = {
-- move legend from center position to top
legend = {
y = { value = -outerRadius },
},
title = {
fill = { value = persistentGrey }
},
labels = {
fill = { value = persistentGrey },
},
}
end
return legend
end
function p.chart(frame)
-- chart width and height
local graphwidth = tonumber(frame.args.width) or 200
local graphheight = tonumber(frame.args.height) or 200
-- chart type
local chartType = frame.args.type or "line"
-- interpolation mode for line and area charts: linear, step-before, step-after, basis, basis-open, basis-closed (type=line only), bundle (type=line only), cardinal, cardinal-open, cardinal-closed (type=line only), monotone
local interpolate = frame.args.interpolate
-- mark colors (if no colors are given, the default 10 color palette is used)
local colorString = frame.args.colors
if colorString then colorString = string.lower(colorString) end
local colors = stringArray(colorString)
-- for line charts, the thickness of the line; for pie charts the gap between each slice
local linewidth = tonumber(frame.args.linewidth)
local linewidthsString = frame.args.linewidths
local linewidths
if linewidthsString and linewidthsString ~= "" then linewidths = numericArray(linewidthsString) or false end
-- x and y axis caption
local xTitle = frame.args.xAxisTitle or frame.args.xaxistitle
local yTitle = frame.args.yAxisTitle or frame.args.yaxistitle
-- x and y value types
local xType = frame.args.xType or frame.args.xtype
local yType = frame.args.yType or frame.args.ytype
-- override x and y axis minimum and maximum
local xMin = frame.args.xAxisMin or frame.args.xaxismin
local xMax = frame.args.xAxisMax or frame.args.xaxismax
local yMin = frame.args.yAxisMin or frame.args.yaxismin
local yMax = frame.args.yAxisMax or frame.args.yaxismax
-- override x and y axis label formatting
local xAxisFormat = frame.args.xAxisFormat or frame.args.xaxisformat
local yAxisFormat = frame.args.yAxisFormat or frame.args.yaxisformat
local xAxisAngle = tonumber(frame.args.xAxisAngle) or tonumber(frame.args.xaxisangle)
-- x and y scale types
local xScaleType = frame.args.xScaleType or frame.args.xscaletype
local yScaleType = frame.args.yScaleType or frame.args.yscaletype
-- log scale require minimum > 0, for now it's no possible to plot negative values on log - TODO see: https://www.mathworks.com/matlabcentral/answers/1792-log-scale-graphic-with-negative-value
-- if xScaleType == "log" then
-- if (not xMin or tonumber(xMin) <= 0) then xMin = 0.1 end
-- if not xType then xType = "number" end
-- end
-- if yScaleType == "log" then
-- if (not yMin or tonumber(yMin) <= 0) then yMin = 0.1 end
-- if not yType then yType = "number" end
-- end
-- show grid
local xGrid = frame.args.xGrid or frame.args.xgrid or false
local yGrid = frame.args.yGrid or frame.args.ygrid or false
-- for line chart, show a symbol at each data point
local showSymbols = frame.args.showSymbols or frame.args.showsymbols
local symbolsShape = frame.args.symbolsShape or frame.args.symbolsshape
local symbolsNoFill = frame.args.symbolsNoFill or frame.args.symbolsnofill
local symbolsStroke = tonumber(frame.args.symbolsStroke or frame.args.symbolsstroke)
-- show legend with given title
local legendTitle = frame.args.legend
-- show values as text
local showValues = frame.args.showValues or frame.args.showvalues
-- show v- and h-line annotations
local v_annoLineString = frame.args.vAnnotatonsLine or frame.args.vannotatonsline
local h_annoLineString = frame.args.hAnnotatonsLine or frame.args.hannotatonsline
local v_annoLabelString = frame.args.vAnnotatonsLabel or frame.args.vannotatonslabel
local h_annoLabelString = frame.args.hAnnotatonsLabel or frame.args.hannotatonslabel
-- decode annotations cvs
local v_annoLine, v_annoLabel, h_annoLine, h_annoLabel
if v_annoLineString and v_annoLineString ~= "" then
if xType == "number" or xType == "integer" then
v_annoLine = numericArray(v_annoLineString)
else
v_annoLine = stringArray(v_annoLineString)
end
v_annoLabel = stringArray(v_annoLabelString)
end
if h_annoLineString and h_annoLineString ~= "" then
if yType == "number" or yType == "integer" then
h_annoLine = numericArray(h_annoLineString)
else
h_annoLine = stringArray(h_annoLineString)
end
h_annoLabel = stringArray(h_annoLabelString)
end
-- pie chart radiuses
local innerRadius = tonumber(frame.args.innerRadius) or tonumber(frame.args.innerradius) or 0
local outerRadius = math.min(graphwidth, graphheight)
-- format JSON output
local formatJson = frame.args.formatjson
-- get x values
local x
x, xType, xMin, xMax = deserializeXData(frame.args.x, xType, xMin, xMax)
-- get y values (series)
local yValues = {}
local seriesTitles = {}
for name, value in pairs(frame.args) do
local yNum
if name == "y" then yNum = 1 else yNum = tonumber(string.match(name, "^y(%d+)$")) end
if yNum then
yValues[yNum] = value
-- name the series: default is "y<number>". Can be overwritten using the "y<number>Title" parameters.
seriesTitles[yNum] = frame.args["y" .. yNum .. "Title"] or frame.args["y" .. yNum .. "title"] or name
end
end
local y
y, yType, yMin, yMax = deserializeYData(yValues, yType, yMin, yMax)
-- create data tuples, consisting of series index, x value, y value
local data
if chartType == "pie" then
-- for pie charts the second second series is merged into the first series as radius values
data = convertXYToSingleSeries(x, y, xType, yType, { "y", "r" })
else
data = convertXYToManySeries(x, y, xType, yType, seriesTitles)
end
-- configure stacked charts
local stacked = false
local stats
if string.sub(chartType, 1, 7) == "stacked" then
chartType = string.sub(chartType, 8)
if #y > 1 then -- ignore stacked charts if there is only one series
stacked = true
-- aggregate data by cumulative y values
stats =
{
name = "stats", source = "chart", transform =
{
{
type = "aggregate",
groupby = { "x" },
summarize = { y = "sum" }
}
}
}
end
end
-- add annotations to data
local vannoData, hannoData
if v_annoLine then
vannoData = { name = "v_anno", format = { type = "json", parse = { x = xType } }, values = {} }
for i = 1, #v_annoLine do
local item = { x = v_annoLine[i], label = v_annoLabel[i] }
table.insert(vannoData.values, item)
end
end
if h_annoLine then
hannoData = { name = "h_anno", format = { type = "json", parse = { y = yType } }, values = {} }
for i = 1, #h_annoLine do
local item = { y = h_annoLine[i], label = h_annoLabel[i] }
table.insert(hannoData.values, item)
end
end
-- create scales
local scales = {}
local xscale = getXScale(chartType, stacked, xMin, xMax, xType, xScaleType)
table.insert(scales, xscale)
local yscale = getYScale(chartType, stacked, yMin, yMax, yType, yScaleType)
table.insert(scales, yscale)
local colorScale = getColorScale(colors, chartType, #x, #y)
table.insert(scales, colorScale)
local alphaScale = getAlphaColorScale(colors, y)
table.insert(scales, alphaScale)
local lineScale
if (linewidths) and (chartType == "line") then
lineScale = getLineScale(linewidths, chartType)
table.insert(scales, lineScale)
end
local radiusScale
if chartType == "pie" and #y > 1 then
radiusScale = getValueScale("r", 0, outerRadius)
table.insert(scales, radiusScale)
end
-- decide if lines (strokes) or areas (fills) should be drawn
local colorField
if chartType == "line" then colorField = "stroke" else colorField = "fill" end
-- create chart markings
local chartvis = getChartVisualisation(chartType, stacked, colorField, #y, innerRadius, outerRadius, linewidth, alphaScale, radiusScale, lineScale, interpolate)
local marks = { chartvis }
-- text marks
if showValues then
if type(showValues) == "string" then -- deserialize as table
local keyValues = mw.text.split(showValues, "%s*,%s*")
showValues = {}
for _, kv in ipairs(keyValues) do
local key, value = mw.ustring.match(kv, "^%s*(.-)%s*:%s*(.-)%s*$")
if key then showValues[key] = value end
end
end
local chartmarks = chartvis
if chartmarks.marks then chartmarks = chartmarks.marks[1] end
local textmarks = getTextMarks(chartmarks, chartType, outerRadius, scales, radiusScale, yType, showValues)
if chartmarks ~= chartvis then
table.insert(chartvis.marks, textmarks)
else
table.insert(marks, textmarks)
end
end
-- grids
if xGrid then
if xGrid == "0" then xGrid = false
elseif xGrid == 0 then xGrid = false
elseif xGrid == "false" then xGrid = false
elseif xGrid == "n" then xGrid = false
else xGrid = true
end
end
if yGrid then
if yGrid == "0" then yGrid = false
elseif yGrid == 0 then yGrid = false
elseif yGrid == "false" then yGrid = false
elseif yGrid == "n" then yGrid = false
else yGrid = true
end
end
-- symbol marks
if showSymbols and chartType ~= "rect" then
local chartmarks = chartvis
if chartmarks.marks then chartmarks = chartmarks.marks[1] end
if type(showSymbols) == "string" then
if showSymbols == "" then showSymbols = true
else showSymbols = numericArray(showSymbols)
end
else
showSymbols = tonumber(showSymbols)
end
-- custom size
local symSize
if type(showSymbols) == "number" then
symSize = tonumber(showSymbols*showSymbols*8.5)
elseif type(showSymbols) == "table" then
symSize = {}
for k, v in pairs(showSymbols) do
symSize[k]=v*v*8.5 -- "size" acc to Vega syntax is area of symbol
end
else
symSize = 50
end
-- symSizeScale
local symSizeScale = {}
if type(symSize) == "table" then
symSizeScale = getSymSizeScale(symSize)
table.insert(scales, symSizeScale)
end
-- custom shape
if stringArray(symbolsShape) and #stringArray(symbolsShape) > 1 then symbolsShape = stringArray(symbolsShape) end
local symShape = " "
if type(symbolsShape) == "string" and shapes[symbolsShape] then
symShape = shapes[symbolsShape]
elseif type(symbolsShape) == "table" then
symShape = {}
for k, v in pairs(symbolsShape) do
if symbolsShape[k] and shapes[symbolsShape[k]] then
symShape[k]=shapes[symbolsShape[k]]
else
symShape[k] = "circle"
end
end
else
symShape = "circle"
end
-- symShapeScale
local symShapeScale = {}
if type(symShape) == "table" then
symShapeScale = getSymShapeScale(symShape)
table.insert(scales, symShapeScale)
end
-- custom stroke
local symStroke
if (type(symbolsStroke) == "number") then
symStroke = tonumber(symbolsStroke)
-- TODO symStroke serialization
-- elseif type(symbolsStroke) == "table" then
-- symStroke = {}
-- for k, v in pairs(symbolsStroke) do
-- symStroke[k]=symbolsStroke[k]
-- --always draw x with stroke
-- if symbolsShape[k] == "x" then symStroke[k] = 2.5 end
--always draw x with stroke
-- if symbolsNoFill[k] then symStroke[k] = 2.5 end
-- end
else
symStroke = 0
--always draw x with stroke
if symbolsShape == "x" then symStroke = 2.5 end
--always draw x with stroke
if symbolsNoFill then symStroke = 2.5 end
end
-- TODO -- symStrokeScale
-- local symStrokeScale = {}
-- if type(symStroke) == "table" then
-- symStrokeScale = getSymStrokeScale(symStroke)
-- table.insert(scales, symStrokeScale)
-- end
local symbolmarks = getSymbolMarks(chartmarks, symSize, symShape, symStroke, symbolsNoFill, alphaScale)
if chartmarks ~= chartvis then
table.insert(chartvis.marks, symbolmarks)
else
table.insert(marks, symbolmarks)
end
end
local vannolines, vannolabels, hannolines, hannolabels = getAnnoMarks(chartmarks, persistentGrey, persistentGrey, 0.75)
if vannoData then
table.insert(marks, vannolines)
table.insert(marks, vannolabels)
end
if hannoData then
table.insert(marks, hannolines)
table.insert(marks, hannolabels)
end
-- axes
local xAxis, yAxis = getAxes(xTitle, xAxisFormat, xAxisAngle, xType, xGrid, yTitle, yAxisFormat, yType, yGrid, chartType)
-- legend
local legend
if legendTitle and tonumber(legendTitle) ~= 0 then legend = getLegend(legendTitle, chartType, outerRadius) end
-- construct final output object
local output =
{
version = 2,
width = graphwidth,
height = graphheight,
data = { data },
scales = scales,
axes = { xAxis, yAxis },
marks = marks,
legends = { legend }
}
if vannoData then table.insert(output.data, vannoData) end
if hannoData then table.insert(output.data, hannoData) end
if stats then table.insert(output.data, stats) end
local flags
if formatJson then flags = mw.text.JSON_PRETTY end
return mw.text.jsonEncode(output, flags)
end
function p.mapWrapper(frame)
return p.map(frame:getParent())
end
function p.chartWrapper(frame)
return p.chart(frame:getParent())
end
function p.chartDebuger(frame)
return "\n\nchart JSON\n ".. p.chart(frame) .. " \n\n" .. debuglog
end
-- Given an HTML-encoded title as first argument, e.g. one produced with {{ARTICLEPAGENAME}},
-- convert it into a properly URL path-encoded string
-- This function is critical for any graph that uses path-based APIs, e.g. PageViews graph
function p.encodeTitleForPath(frame)
return mw.uri.encode(mw.text.decode(mw.text.trim(frame.args[1])), 'PATH')
end
return p
